Ride Engineering: KTM Replacement Bar Mount

Ride Engineering: KTM Replacement Bar Mount

Ride Engineering, the industry leader in high quality racing accessories, introduces Replacement Bar Mounts for the Factory Edition, and all 2016, KTM models. This OEM replacement Bar Mount has a one-piece top with 8 pinch bolts to better resist bending making it superior to the stock bar mount. Precision machined from aircraft quality aluminum, it features 3mm of adjustability forward […]

Ride Engineering 2015.5 KTM Performance Link

Ride Engineering 2015.5 KTM Performance Link

Ride Engineering, the industry leader in high quality racing accessories, introduces a new KTM Performance Link for the 2015.5 Factory Edition. This product was designed to reduce the ‘high rear end sensation’ some test riders complained about when riding the all new 250 and 450SXF Factory Edition. The new 1.3mm longer arm will lower the back end approximately 7mm and […]

NEW! YZ Rubber Mounted Triple Clamps from Ride Engineering

NEW! YZ Rubber Mounted Triple Clamps from Ride Engineering

The 2014 YZ450 & 250F come with Rubber Mounted Triple Clamps for the first time since these models were introduced. It’s a great added feature that reduces vibration and lessens hand fatigue. Ride Engineering also thinks this a superior design so we revised our triple clamps to match. The good news for riders with 2013 and older bikes is that […]

January 8, 2014 at 7:48 am 0 comments

NEW! 2014 YZF One-Piece Anti-Twist Bar Mount from Ride Engineering

NEW! 2014 YZF One-Piece Anti-Twist Bar Mount from Ride Engineering

The 2014 YZ450 & 250F come with Rubber Mounted Triple Clamps for the first time since these models were introduced. It’s a great added feature that reduces vibration and lessens hand fatigue. The only drawback is when you crash, your bars twist to the side in the stock two-piece mounts. Ride’s newest bar mount (YZ-BBM00-CA) greatly reduces this problem by […]

December 3, 2013 at 1:41 pm 0 comments

@RideEngineering NEW 2013 CRF450R Complete Suspension Linkage

@RideEngineering NEW 2013 CRF450R Complete Suspension Linkage

Ride’s newest product is a full linkage system for the 2013 CRF450R. The combination outer link and center knuckle has two effects on this new Honda. It improves the suspension action and handling entering corners (by holding the shock up in the stroke) and it is more plush on acceleration chop exiting the turn. By offering both components instead of […]

New from Ride Engineering: CRF250/450X Triple Clamps

New from Ride Engineering: CRF250/450X Triple Clamps

New from Ride Engineering: CRF250/450X Triple Clamps with Headlight Mounting Kit. 2004-2013 20MM OFFSET CRF450X TRIPLE CLAMPS P.N.: CR-BTB40-RA or BA MSRP: $479.95 2004-2013 22MM OFFSET CRF450X TRIPLE CLAMPS P.N.: CR-BTB20-RA or BA MSRP: $479.95 NEW! 2004-2013 HEADLIGHT MOUNTING KIT P.N.: CR-XHB00-KT MSRP: $59.95 By redesigning the upper triple clamp to fit the upside down CRX steering dampener, Customers can […]

Ride Engineering Limited Edition BLUE KX450F Lowering Link

Ride Engineering Limited Edition BLUE KX450F Lowering Link

Ride Engineering Limited Edition BLUE KX450F Lowering Link is in stock now: MSRP $219.95 Now available in blue! Our new KX450 link stiffens the initial part of the stroke for better control and less wallowing in rough sections of the track. It helps the shock stay linear longer (more plush) before getting into the high speed circuit that makes it feel […]

Ride Engineering has a long list of support teams and riders in 2013 Supercross & Arenacross

Ride Engineering has a long list of support teams and riders in 2013 Supercross & Arenacross

Look around the pits at your local Supercross and you will find lots of teams sponsored by Ride Engineering and running some or all of the following products: Triple Clamps, Bar Mounts, Lowering Links, Brake Lines, Brake Calipers, Engine Plugs, Brake Clevis and Axle Blocks. On Yamaha YZ450s: Velocity 3 (Riders: Kyle Chisholm & Bobby Kiniry) On Yamaha YZ450s: N-Fab […]

February 19, 2013 at 11:12 am 0 comments

NEW! 2013 Ride Eng. KXF 21.5mm offset Triple Clamp Set – LIMITED EDITION BLUE

NEW! 2013 Ride Eng. KXF 21.5mm offset Triple Clamp Set – LIMITED EDITION BLUE

2013 KX450/250F Part # KXTBK20ME 2006-2012 KX450F Part # KXTBK20MB Click here for more information.

December 6, 2012 at 6:11 am Comments are Disabled

Bobby Kiniry Rockstar Energy/Yamaha bike set up

Bobby Kiniry Rockstar Energy/Yamaha bike set up

Bobby Kiniry rocked #81 for the Rockstar Energy/Yamaha team in 2012 and is here now to break down his bike for you to pick apart. Check in with Kiniry and his mechanic at Southwick to find out everything that he rides from tires to grips. Get the full picture of Bobby Kiniry’s bike in this Setup.

October 11, 2012 at 8:48 am Comments are Disabled

Ride Engineering 2013 KX250F & 450F Triple Clamps

Ride Engineering 2013 KX250F & 450F Triple Clamps

Ride Engineering has newly designed triple clamps for the 2013 KXFs to accommodate the larger 48mm SSF fork and the re-designed front number plate. They are available in two offsets (20mm & 21.5mm) to improve handling based on the rider’s intended use and in three color choices. Ride has also upgraded the material of the upper clamp (2024AL) to match […]

August 22, 2012 at 9:08 am Comments are Disabled

Ride Engineering Billet Front Brake Caliper

Ride Engineering Billet Front Brake Caliper

In addition to our efforts to try and improve motorcycle handling, Ride Engineering wants to become a bigger factor in performance braking. A benefit of our new brake caliper is stronger, more progressive braking (more power, less of an on/off sensation) with less hand pressure. This was achieved by removing the flex associated with stock casting: by increasing the piston […]

July 17, 2012 at 9:46 am Comments are Disabled

Ride Engineering Welcomes Tommy Weeck

Ride Engineering Welcomes Tommy Weeck

Ride Engineering welcomes their newest test rider Tommy Weeck to Yamaha’s facotry support team (Star Racing Valli Motorsports). Tommy went 19-8 for 12th overall at Redbub in his first race on the YZ250F. Ride Eng. components used on Tomy’s bike are: Triple Clamps, One Piece Rubber mounted bar mounts, Lowering Link, Billet Brake Caliper and miscellaneous small bolt on billet […]

July 17, 2012 at 9:23 am Comments are Disabled

Step 15: Ride Engineering Products

Step 15: Ride Engineering Products

Looking for factory inspired products? Well I found plenty of them at Ride Engineering. At first glance someone may think that I’m just installing some fancy anodized parts to enhance the appearance of my project bike, true but these products offer so much more. Ride Engineering designs their products to optimize motorcycle performance while enhancing its appearance and has been […]

Ride Engineering has signed Colton Haaker

Ride Engineering has signed Colton Haaker

Ride Engineering Inc. of Costa Mesa California has signed Colton Haaker to a one year contract to represent the company in WORCS and Endurocross racing. Our focus is primarily motocross, but we can improve the handling and stopping capabilities of dirt bikes in all forms of off-road racing. “We are in our sixth year with Star Racing (Valli) Yamaha for […]

February 10, 2012 at 1:06 pm Comments are Disabled